Parameter IPsec Network Settings
Peer network The address of the remote network behind the peer
Peer netmask The netmask of the remote network behind the peer
NAT address Optionally, you can apply NAT (masquerading) for packets coming
from a different local network. The NAT address must reside in the
network previously specified as local network. If NAT address is en-
abled but the value is empty the router will try to guess a valid NAT
address (not recommended).
Client Management
Once you have successfully set up an IPsec tunnel, you can manage and enable clients connecting to
your service. It is possible to generate and download expert mode files for enabled clients which can
be used to easily populate each client.
NB1601 122 User Manual for NRSW version 4.8.0.103
To Next Page
Loading...
