Hirschmann NetModule NB1601 - Regional Settings

NetModule Router Simulator
Hostname NB1600
Software Version 4.4.0.103
© 2004-2020, NetModule AG
System
Settings
Time & Region
Reboot
Authentication
User Accounts
Remote Authentication
Software Update
Software Update
Modem Firmware Update
Software Profiles
Configuration
File Configuration
Factory Configuration
Troubleshooting
Network Debugging
System Debugging
Tech Support
Keys & Certificates
Licensing
Legal Notice
System Time
Current system time:
2020-01-09 02:03:05
Set time
Time Synchronisation
Primary NTP server:
0.pool.ntp.org
Secondary NTP server:
1.pool.ntp.org
Preferred NTP server:
Primary NTP Server
Ping check:
enabled
Sync time from GNSS:
Time Zone
Time zone:
UTC+01:00 Zurich
Daylight saving changes:
Apply
Sync
HOME INTERFACES ROUTING FIREWALL VPN SERVICES SYSTEM
LOGOUT
Figure 6.67.: Regional settings
Parameter Time Synchronisation
NTP server Address of the primary NTP server
NTP server 2 Optionally, the address of a second NTP server
Ping check Uses an ICMP ping to check whether NTP servers are available when
running initial time update
Sync time from GNSS Derive time from first GNSS device (if enabled)
Parameter Time Zone
Time Zone Set the local time zone.
Daylight saving changes Enable/disable daylight saving changes.
Virtualization
Virtualization techniques can be used to run multiple isolated guests on top of the host system. The
netmodule routers use OS-level virtualization: A system is virtualized at the operating system level,
NB1601 200 User Manual for NRSW version 4.8.0.103