This section can be used to configure security-related settings.
Parameter WLAN Access-Point Configuration
SSID The network name (called SSID)
Security mode The desired security mode
WPA mode WPA2 should be preferred over WPA1, running WPA/WPA2 mixed-
mode offers both.
WPA cipher The WPA cipher to be used, the default is to run both (TKIP and
CCMP)
Passphrase The passphrase used for authentication with WPA-Personal.
Force PMF Enables Protected Management Frames
Hide SSID Hides the SSID
Isolate clients Disables client-to-client communication
Band steering master The WLAN interface which the client should be steered to
Opportunistic Wireless En-
cryption transition
The WLAN interface for a seamless transition from an OPEN WLAN
to an OWE encrypted WLAN interface
Accounting Sets accounting profile
The following security modes can be configured:
Parameter WLAN Security Modes
Off SSID is disabled
None No authentication, provides an open network
WEP WEP (is nowadays discouraged)
WPA-Personal WPA-Personal (TKIP, CCMP), provides password-based authentica-
tion
WPA-Enterprise WPA-Enterprise in AP mode, can be used to authenticate against a
remote RADIUS server which can be configured in chapter 6.8.2
WPA-RADIUS EAP-PEAP/MSCHAPv2 in client mode, can be used to authenticate
against a remote RADIUS server which can be configured in chap-
ter 6.8.2
WPA-TLS EAP-TLS in client mode, performs authentication using certificates
which can be configured in chapter 6.8.8
OWE Opportunistic Wireless Encryption alias Enhanced OPEN provides
encryption WLAN without any authentication
NB1601 73 User Manual for NRSW version 4.8.0.103
To Next Page
Loading...
