6.3.7. Serial
This page can be used to manage your serial ports. A serial port can be used by:
Parameter Serial Port Usage
none The serial port is not used
login console The serial port is used to open a console which can be accessed
with a serial terminal client from the other side. It will provide helpful
bootup and kernel messages and spawns a login shell, so that users
can login to the system. If more than one serial interface is available,
one serial interface can be configured as ’login console’ at a time.
device server The serial port will be exposed over a TCP/IP port and can be used
to implement a Serial/IP gateway.
modem bridge Bridges the serial interface to the Modem TTY of an intergrated
WWAN Modem.
modem emulator Emulates a classical AT command driven modem on the serial inter-
face. See http://wiki.netmodule.com/app-notes/hayes-modem-
at-simulator for detailed information.
SDK The serial port will be reserved for SDK scripts.
NB1601 81 User Manual for NRSW version 4.8.0.103
To Next Page
Loading...
