Hitachi CP100NX User Manual

 Pressing
when the dimming backlight
mode is enabled opens the screen shown in Fig.
3-4-5 (4c) that allows you to set the time when the
dimming backlight mode will be engaged. You can set
a time between 1 and 180 minutes in one minute
increments.
 If you do not touch the screen for the set time period,
the backlight will be set to its darkest level.
 Touching the screen in dimming backlight mode will
return normal brightness to the screen adjusted in
step (1).
 Pressing [Dimming only while stop] will dim the
backlight only when the rotor is not turning and
pressing [Dimming even while operation] will dim the
lighting after the set time period also during operation.
(5) Language setting
(6) Schedule
1) Method for registering centrifuge schedules
Step
Touchscreen operation
Instrument operations and notes
1 Press the [Schedule] button.
This centrifuge allows you to record (register) up to 40 schedules. The following
describes how to record (register) a schedule. Note that a user registration (for
details, refer to Section 3-4-6 (1) User Management) is required for this operation.
●
The CUSTOM
screen is replaced
by the Schedule
screen.
Fig. 3-4-5 (4c) Screen for setting the
time period after which the backlight
will be dimmed
3-4-5 Customizing
Schedule
[Add] button
Fig. 3-4-5 (5) Language setting screen
Select to change the language. This function
provides a selection of languages.
Press the selected language field.The selected
field turns blue.
Press the CUSTOM tab or [X] button to store the
settings.
3-75

Hitachi CP100NX Specifications

General

Brand	Hitachi
Model	CP100NX
Category	Laboratory Equipment
Language	English