Hitachi CP100NX User Manual

(4) Run time indication
1) [Elapsed] button:
Elapsed time is displayed in the centrifuge run time
indication field in the Run screen and "Lapse" is indicated
to the right above the display field.
2) [Remaining] button:
Remaining time is displayed in the centrifuge run time
indication field in the Run screen and "Remain" is indicated
to the right above the display field.
Press to select either the [Elapsed] or the [Remaining]. Confirm that the selected button is
surrounded by a red frame before pressing the [X] button or ADMIN tab to store the setting.
(5) Actual run timer
1) [Enable] button: Run time is counted down when the set
speed is obtained.
2) [Disable] button: Run time is counted down right after the
[START] button is pressed.
Press to select either the [Enable] or the [Disable]. Confirm
that the selected button is surrounded by a red frame before
pressing the [X] button or ADMIN tab to store the setting.
3-4-6 Admin Function
Select either the elapsed time or remaining time as run time.
Note that when the run time setting is set to [HOLD], elapsed time is automatically
selected.
You can set the run time to start counting down either when the [START] button is
pressed or when the set speed is obtained.
Fig. 3-4-6 (5) Actual run timer setting screen
Fig. 3-4-6 (4) Set run time
indication screen
3-98

Hitachi CP100NX Specifications

General

Brand	Hitachi
Model	CP100NX
Category	Laboratory Equipment
Language	English