Hitachi CP100NX User Manual

[Display and operations when entering run parameters]
Press the SPEED, TIME, TEMP, ACCEL or DECEL field on the touchscreen to display the on-screen
keypad.
Fig. 3-2-2 Setting value display
(1) Press the field of the item
you want to set. The initial
digits are displayed in
blue.
Color of initial digits: Blue
(2) Press the on-screen keypad to
enter a numeric value.
Example: 100,000 rpm
Press [1] [0] [0] [0].
(3) If you do not want to
make any other settings,
press the [Enter] button
on the on-screen keypad.
If you also want to make
other settings, press the
field you want to set.
This completes the first
entry and the field is
ready to accept your next
entry.
Setting values are
displayed in the setting
value display field.
Setting value
display field
[On-screen keypad]
3-2-1 Setting Run Parameters
3-6

Hitachi CP100NX Specifications

General

Brand	Hitachi
Model	CP100NX
Category	Laboratory Equipment
Language	English