General description
The CP-NX Series is designed to separate liquid-suspended materials having different densities
and particle size.
The series is a series of products that pursue user-friendliness and reliability based on our many
years of experience in developing centrifuges. This series offers many new features that we are
confident of satisfying your requirements. These features include the following.
1. Maximum speed is 100,000 rpm(803,000 x g).(CP100NX)
2. When using RLM rotors, the rotor life time is automatically managed by the rotor life
management (RLM) feature of the ultracentrifuge, so keeping a rotor log book is not necessary.
The rotor life time can be extended by running the rotor at lower speeds.
3. The touchscreen with easy-to-see color liquid crystal screen is incorporated.
4. Color touch-sensitive liquid crystal display and graphic user interface with high contrast against
back screen in black color enable you to easily operate the system or select various menus
and functions by touching the icon on the display.
5. The real-time control feature enables setting a start time or finish time, thus letting you run your
machine at desired date and time.
6. Centrifugal force (RCFmax and RCFavg) can be displayed and set (Note1).
7. Thousand varieties of 30 stepped mode can be programmed for a wide range of applications
such as step running.
8. Various alert indication can notify users of the causes and necessary actions of the troubles.It
can realize troubleshooting easier and quicker.
9. The current centrifuge status is identified at a glance by the signal light of the upper front
edge of this centrifuge.
10. Space saving design. The installation area required is 0.72m
2
(800X900mm). Lower top deck
makes it easy to install and remove the rotor.
11. These products spin very quietly, and are thus well suited for personal use.
12. Samples can be easily balanced visually.
13. A CFC-free thermomodule cooling system is employed featuring a powerful cooling capacity.
14. In addition to door lock and an imbalance detector, dual overspeed detection system is
incorporated for overspeed detection for even greater safety.
Note1:RCF: Relative Centrifugal Force
4
To Next Page
Loading...
Need help?
General
