Hitachi CP100NX User Manual

(4) Operation procedures for copying programs
The following describes how to copy a registered program and register the result as a new program.
This is a convenient method when you want to register a new program by changing part of a
registered program.
Step Touchscreen operation Screen displays and notes
1 Open the Program list
screen following step 1 in
"(2) Procedures for
Changing Program run
parameters."
2
Press the program folder you
want to copy from the
program list.
The example shows how to
copy program No. 0008.
3 Press the [MENU] button.
4 Press the [Copy]
button in
the MENU field and enter the
number of the program you
want to register.
 The unregistered program with the lowest number is
displayed when the screens change.
 To register to another number, press the program no. entry
field and enter the desired number on the on-screen keypad.
●
The Program list
screen appears.
Program No.
The selected folder is
surrounded by a blue
frame.
[MENU] box
●
The MENU box appears
in the Program list
screen.
●
The Program No. entry
screen appears.
Program No. entry
field
[MENU] button
[Copy] button
3-3-1-1 Program Registration Procedures
3-35

Hitachi CP100NX Specifications

General

Brand	Hitachi
Model	CP100NX
Category	Laboratory Equipment
Language	English