Hitachi CP100NX User Manual

Step Touchscreen operation Instrument operations and notes
3 Press the [ZONAL] button in
the ZONAL setting screen.
4 Enter “30” for the PIN on the
on-screen keypad and press
the [Enter] button.
[3] [0] [Enter]
5 Press the Run screen tab.
 The ZONAL tab is added to the Function Selection Area and
the zonal operation chart is displayed.
 The MENU screen will reappear if the [MENU] tab or the [X]
button is pressed instead of the Run screen tab.
6 Set run parameters for high
speed according to the
instructions in Section 3-2-1
"Setting Run Parameters."
●
The Set Validation
No. screen appears.
●
ZONAL operation is
enabled when the
[ZONAL] button is
surrounded by a
yellow frame.
●
The Run screen
appears.
3-4-3 Zonal Operation Procedures
Zonal operation
chart
●
The run parameters
appear in the setting
value display field in
the Run screen.
Setting value display
field
3-67

Hitachi CP100NX Specifications

General

Brand	Hitachi
Model	CP100NX
Category	Laboratory Equipment
Language	English