Hitachi DIGITAL 8 VM-D965LE - Function; Demonstration (Demo) Mode

2. DEMONSTRATION (DEMO) MODE
This camera/recorder is equipped with a demonstration mode in which the incorporated functions are automatically switched
and displayed.
Caution: The camera/recorder does not accept functions (operations) other than those shown below:
e EJECT
e Setting CAM/OFF/VIDEO switch to "OFF"
2.1. Setting the Demo Mode
Attach a power supply (battery) and choose one of the following procedures:
1) | When "DEMO AUTO" is specified using menu, leave the camera/recorder for approx. 10 minutes with all the following
conditions satisfied:
e Date not set
e Cassette tape not inserted
e Inthe camera recording mode
2) When "DEMO AUTO" is specified using the menu, set the CAM/OFF/VIDEO switch from "OFF" to "CAM" while holding
down the "PLAY" button, with all the following conditions satisfied:
e Cassette tape not inserted
e PHOTO/STANDBY/LOCK (STANDBY/LOCK) switch set to "STANDBY"
3) | Specify "DEMO START" using the menu with a cassette not inserted, and then release the menu.
Note: "DEMO START" cannot be specified when a cassette is in the camera/recorder.
2.2 Exiting the Demo Mode
Perform one of the following procedures to exit the demo mode:
1) | CAM/OFF/VIDEO switch to "OFF" or remove the power supply.
2) Load a cassette.
2.3 Contents of Demonstration
The following table shows the examples of display/operation contents in the demo mode:
The display/operation in the demo mode will vary, depending on the model (equipped functions provided or not).
No. | Item Display content, example of displa' Display time Remarks
1 __| Start of demo Ail display off.
Display of model name
3 WELCOME display WELCOME TOHITACH| = ———__ |. wwnwnne- ==
DIGITAL DEMONSTRATION
DIGITAL 8 displa DIGITAL 8 ee ee
Introduction of functions HQ D.ZOOM/5-MODE EFFECTS/ Varies, depending on the
7-COLOR TITLES/5-MODE AE/6-MODE model.
FADER/DIGITAL TBC/EIS/2.5" LCD/
PHOTO MODE
EIS OFF: Electronic zoom operation,
vertical picture shaking Is considerable.
EIS ON: Electronic zoom operation,
vertical picture shaking is negligible.
EIS OFF: Electronic zoom operation,
horizontal picture shaking is
considerable.
EIS ON: Electronic zoom operation,
horizontal picture shaking is negligible.
Only for models with EIS
function.
EIS simulation For approx. 3s
For approx. 3s
For approx. 3s
For approx. 3s
E7-7