141
Conditions in which PC connection software can be used:
• Windows 98 preinstalled PC
• IBM PC/AT compatible PC
• Equipped with USB port in standard
• CD-ROM or DVD-ROM drive provided
The following hardware requirements are recommended for smooth use:
• Pentium II, Pentium III, Celeron with clock frequency 400 MHz or higher
• Memory of at least 64 MB
• Free space on hard disc: at least 100 MB
The following are stored in the PC connection software CD-ROM:
• USB device driver for DVD camera/recorder
• UDF Reader
Cautions:
• No power is supplied to this DVD camera/recorder via PC connection
cable: Use the AC adapter/charger to power the DVD camera/recorder.
• The PC connection cable provided is exclusively for this DVD camera/
recorder. A generally available USB cable cannot be used.
• Unplug all cables other than the DC power cable and PC connection cable
when connecting DVD camera/recorder to PC.
• Do not unplug the PC connection cable when the ACCESS indicator is lit or
blinking: Disconnecting it could damage the data on disc.
• And, thoroughly read the instruction manual of PC connection software.
• Connect the DVD camera/recorder to PC at comfortable room tempera-
ture: If movies are transferred at ambient temperature of 35˚C or more for
an extended time, reading errors could result.
• Hitachi does not guarantee operation in the following cases:
- When using USB port added by installing USB extended board
- When USB hub is used
- When cables other than the cable supplied are used
- When PC equipped with DVD-RAM drive is used
• If you use PC equipped with DVD-RAM drive, change the UDF file system to
the UDF device driver contained in the PC connection software.
Transferring Data to PC
E-P137-142 01.1.29, 1:44 PMPage 141 AdobePageMaker6.5J/PPC
To Next Page
Loading...
