72 Hardware options installation
8. Route the SID cable through the opening in the front of the server, and then install the SID module.
Secure the module using the T-10 screw.
9. Connect the SID module cable to the SID module connector.
CAUTION: When routing cables, make sure that the cables are not in a position where they can be
pinched or crimped.
10. Install the fan cage.
11. Do one of the following:
• Install the air baffle.
• Install the midplane drive cage.
12. Install the access panel.
13. Slide the server into the rack.
To Next Page
Loading...
