Tap Wi-Fi button to open the Wi-Fi settings screen. 4.3.1.
In Wi-Fi settings tap the Wi-Fi toggle to turn the Wi-Fi on/off. 4.3.2.
Tap a network to connect. Tapping it opens a dialog where you can select to connect. 4.3.3.
After connecting once, you’ll connect automatically to the same network if it’s
available. If a password is required (a lock icon appears next to the network name),
you will be asked to type it in.
When Wi-Fi is on and connected, you’ll see the symbol in the status bar. 4.3.4.
To prevent the instrument from automatically connecting to a network, tap the 4.3.5.
network’s menu and select Forget network.
To see details of a network you’re currently connected to, tap its name. A status popup 4.3.6.
will open and display the Mac address, IP address, State, Signal Strength and Security
4.4.
available
networks
toggle
Hitachi High-Tech Analytical Science
▶
23
To Next Page
Loading...
Need help?
General
