Concentrations visible during analysis are not final results until analysis is 3.4.7.2.
complete.
3.5.
After the measurement, the results screen will be displayed. The name of the sample 3.5.1.
is shown, along with the chemistry of the results, the measurement unit, the error, and
the pass/fail determination, if one was programmed.
Swipe left or right to access previous results. 3.5.2.
Tapping the
button will toggle to the spectral view of the results. 3.5.3.
Hitachi High-Tech Analytical Science
▶
19
To Next Page
Loading...
