LAB-X5000 Series User Guide
The Standard Deviation button toggles whether the error data displays on the 4.4.1.
analysis results screen after each measurement.
4.5.
Use the Pass/Fail toggle to choose whether to display pass/fail data in the 4.5.1.
analytical results screen.
Limits for Pass and Fail are set in the Calibration Settings for each element. 4.5.2.
4.6.
Auto Printing 4.6.1.
The Auto Printing setting is a persistent setting, meaning that once it is engaged, it 4.6.2.
remains engaged until turned off.
When the Auto Printing icon is selected, it will remain orange instead of grey. 4.6.3.
To Next Page
Loading...
Need help?
General
