When the software is in the log-in screen, toggle the rocker switch to the [0] OFF 3.1.3.2.
position.
3.2.
There are three customer-accessible levels of user access: Manager, Operator, and Advanced
Operator. Engineer access is reserved for Hitachi authorized service personnel only. Each
level has access to different menus and options, allowing managers to control which features and
controls their analysts may access.
User level is chosen at startup and is determined by which PIN is input to access the 3.2.1.
software. The user can easily toggle between user levels using the dropdown menu
described below.
When gaining access at startup, or when changing user levels from the pulldown menu, 3.2.2.
it is necessary to enter a PIN Code. The PIN Code is different for each access level,
and may be changed by the Manager.
The standard Operator PIN is 0000. Advanced Operator and/or Manager PINs are 3.2.3.
provided at installation.
After the PIN Code has been entered, a Ready screen will appear. This indicates the 3.2.4.
instrument is ready to analyze.
3.3.
The LAB-X5000 is controlled through a touch-screen on-board computer. Basic user training is
provided at installation. All functions of the LAB-X5000 can be executed using the on-board
touch-screen computer.
Hitachi High-Tech Analytical Science
▶
13
To Next Page
Loading...
