LAB-X5000 Series User Guide
Results are used to view the entire results history and choose results for
exports.
Settings is used to access the menu of settings available to the operator
QC Check Sample is used to measure a pre-defined check sample and
compare results to set limits to validate calibration stability.
Blank Subtraction is used to measure a new blank sample to correct for
base material changes. Only active when blank subtraction is applied to the
calibration.
5.2.
Selecting Method displays all Method options available at the current user level. Note 5.2.1.
that not all options are available at all user levels.
Standards, calibration settings, and regressions are discussed in subsequent 5.2.2.
sections.
Choose from calibrations currently in the instrument, modify a calibration, or
delete a calibration.
Choose which analytes are in the method, display name, number of decimal
places to display, and define lower and upper pass-fail limit
To Next Page
Loading...
