Hitachi RCI-4.0FSR - RCD-(0.8-6.0)FSR - 2-Way Cassette; Removal Of The Air Filter And The Air Inlet Grille

7 Servicing
RCD-(0.8-6.0)FSR - 2-way cassette
SMGB0137 rev.0 - 05/2021
201
7
7.3 RCD-(0.8-6.0)FSR - 2-way cassette
7.3.1 Removal of the air lter and the air inlet grille
? NOTE
The Air lter is located inside the air inlet grille.
1
Open the air inlet at grille.
Slide the air suction grille to the front side while pushing it up gently from the opposite side, then open the air suction
grille downwards.
Air inlet at grille
2
Slide the air lter in the arrow direction as shown below and release hooks on both sides to remove the air lter
A, B
A x 5
B x 5
A x 3
B x 3
Symmetric
Filter Hanger
P-AP160DNAP-AP90DNA
Air lter
Air lter
Catch
Air lter
Catch
Slide the air lter
Slide the air lter
Hook
Name
label
Direction
of slide
Hook
Direction of slide
Direction of slide
? NOTE
• Be sure to attach the air lter. If the indoor unit is operated without the air lter, it may cause malfunction of the indoor unit.
• Make sure that the air inlet at grille is securely locked with the knobs. If it is not properly locked, it might open suddenly, resulting in
the grille falling.