Hitachi RCI-4.0FSR - Removal Of The Inlet And Outlet Air Thermistors

7 Servicing
RPI(L/H)-(0.4-6.0)FSRE - Ducted indoor unit
SMGB0137 rev.0 - 05/2021
226
7.5.7 Removal of the inlet and outlet air thermistors
1 Remove the motor and service covers as explained in “7.5.4 Removal of the motor cover” and “7.5.5 Removal of the
service cover”.
2 Remove the drain pan as explained in “7.5.6 Removal of the drain pan”.
3 Disconnect from the Electrical Box and remove the thermistor.
Bottom side
Outlet air thermistor
Inlet air thermistor