Hitachi RCI-4.0FSR - Removal Of The Air Filter

7 Servicing
RPI(L/H)-(0.4-6.0)FSRE - Ducted indoor unit
SMGB0137 rev.0 - 05/2021
234
7.5.12 Removal of the air lter
There are two options for lter extraction, depending on the location of the unit:

Lower extraction
1 Turn 90° the locking bolt and remove the lower air lter support from the unit.
2 Pull down the air lter.
Inlet air
Inlet air Filter
Inlet air
Inlet air Filter
RPIL-FSRE RPI(H)-FSRE

Lateral extraction
1 Turn 90° the locking bolt and remove the lateral Air Filter support from the unit.
2 Pull the Air Filter and fold it over the joint as much as you need for the extraction.
Optionally, the RPI-(1.5~2.0)FSRE unit allows access to the lter from the opposite side for proper maintenance.
1 Turn 90° the locking bolt and remove the lateral air lter support from the unit.
2 Pull the air lter and fold it over the joint as much as you need for the extraction.
Inlet air
Inlet air Filter
Inlet air
Inlet air Filter
Inlet air
Inlet air Filter
RPIL-FSRE RPI(H)-FSRE Right side
RPI(H)-FSRE Left side