7 Servicing
KPI-(252-2002)(E/X)4E - Energy recovery and active energy recovery ventilation units
SMGB0137 rev.0 - 05/2021
273
7
7.9.7 Removal of the damper motor
1 Unscrew the 6 screw form the service cover (f).
2 Unplug the connector that is inside the protection cap.
3 Unscrew the 2 screws that are xing the motor brackets
4 Separate the damper motor from the housing
5 Remove the damper motor
To Next Page
Loading...