EasyManua.ls Logo

Hitachi Simple Modular Storage 100 - Mechanical Specifications

Hitachi Simple Modular Storage 100
100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
B–2
Hitachi Simple Modular Storage 100 User’s Guide
Mechanical Specifications
The following table describes the mechanical specifications for the Hitachi
Simple Modular Storage.
Table B-1: Disk Drive
Parameter Specification
Height 1.02 inches (26.1 mm)
Width 4.0 inches (101.6 mm)
Depth 5.78 inches (147 mm)
Drive Capacity (GB) 142.63/287.62/491.27/737.49
Rotational Speed 142.63/287.62 G bytes: 15,000
491.27/737.49 G bytes: 7,200
Maximum Number of Mountable Drives 12 including two repair slots
Spare Disk 1
Table B-2: Host Interface
Parameter Specification
Interface Type 1 Gbps Ethernet
Maximum Data Transfer Speed to Host 100 Mbytes/Ethernet
Number of iSCSI data ports 1-controller array: 2
2-controller array: 4
Transferred Block Size 512
RAID Level 6
RAID Configuration 4D+2P, 6D+2P, 9D+2P
Flash Memory 16 Mbytes
L2 Cache Memory 512 kbytes
DDR2 SDRAM 512 Mbytes
Data Assurance Method Data Bus: Parity
Cache Memory: ECC (1 bit for correction,
2 bits for detection)
Disk drive: Data assurance code

Table of Contents

Related product manuals