B–4
Hitachi Simple Modular Storage 100 User’s Guide
Environmental Specifications
The following table describes the environmental specifications for the
Hitachi Simple Modular Storage.
Power Cables
Table B-6: Environmental Specifications
Parameter Specification
Temperature, Operating 50° F to 104° F (10° to 40° C)
Temperature, Storage 14° F to 122° F (–10° to 50° C)
Temperature, Transporting –22° F to 140° F (–30° to 60° C)
Temperature Change Rate 50° F (10°C) per hour
Humidity, Operating 46° F to 176° F (8° to 80° C)
Humidity, Storage 46° F to 194° F (8° to 90° C)
Maximum Wet Bulb Temperature 84° F (29° C) noncondensing
Vibration, Operating (m/s2) 2.5 or less (5 to 300Hz) (within 5 seconds)
Vibration, Storage (m/s2) 5.0 or less (5 to 300Hz)
Vibration, Transporting (m/s2) 5.0 or less
Impact, Operating (m/s2) 20 or less (10 ms, half sine wave impact)
Impact, Storage (m/s2) 50 or less (10 ms, half sine wave impact)
Impact, Transporting (m/s2) 80 or less (10 ms, half sine wave impact)
Altitude, Operating –984.25 to 9842 feet (–300 to 3,000 m)
Altitude, Storage -300 to 12,000
Acoustic Noise 60 dB (environmental temperature: 32°C
or less)
Table B-7: Power Cable and Plug Identification
Input Rating
Plug
Configuration
Reference
Standards
Cable and Connector
100V-120V
(standard
attachment)
North America
1 ANSI C73.11
2 NEMA 5-15P
3 IEC 83
200V-240V
North America
1 ANSI C73.11
2 NEMA 6-15P
3 IEC 83
Three wire power cable
with a two-pole, three-
terminal grounding-
type connector.
ab
c
To Next Page
Loading...