Hitachi VSP F1500 - Page 356

raidcom check_ext_storage path
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
Get Command
Status
Async 2E30 001E Online from the mainframe host.
CMDRJE Executing 2E30 8400 The port attribute is not External (ELUN).
CMDRJE Executing 2E30 840E The command cannot be executed with the
specified port attribute.
CMDRJE Executing 2EDA 00EE The command cannot be accepted. After a while,
execute the same command.
Get Command
Status
Async 2EDA 0905 An internal error occurred by the operation of
external path.
Call Hitachi Data Systems customer support.
CMDRJE Executing B980 B901 The command was rejected because the specified
port is for NAS platform (System LU).
CMDRJE Executing B980 B902 The command was rejected because the specified
port is for NAS platform (User LU).
Table 9-14 SSB codes returned by raidcom disconnect external_grp
raidcom disconnect external_grp
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E00 4100 The external volume group is not in the effective
range.
CMDRJE Executing 2E10 0000 The specified LDEV is used for a ShadowImage
pair.
CMDRJE Executing 2E10 0001 It is used as a TrueCopy or Universal Replicator
pair.
CMDRJE Executing 2E10 0003 A ShadowImage pair, a Thin Image/Copy-on-Write
Snapshot pair or a Compatible FlashCopy® V2
relationship or in status of splitting or pending
exists.
CMDRJE Executing 2E10 0004 The specified LDEV is used for a Thin Image pair
or a Copy-on-Write Snapshot pair.
CMDRJE Executing 2E10 0008 It is used as a system disk.
CMDRJE Executing 2E10 0012 It is used as a concurrent copy or XRC.
CMDRJE Executing 2E10 0062 The specified LDEV is used as the primary volume
of a global-active device (GAD) pair.
CMDRJE Executing 2E10 0063 The specified LDEV is used as the secondary
volume of a GAD pair.
9-32
Troubleshooting
Command Control Interface User and Reference Guide