Hitachi WJ Series

Chapter 3 Main Body of the Product
3-1-2
3.1.2 Model of the Product and Specification Label
 How to read a model number.
 What's written on the specification label?
 The model of the product is as follows. Check that the model is same as you ordered.
WJ series type name
Example 1: Single-phase 200 V class 0.4 kW
(for Japan)
C1
-
004
S
F
Example 2: Three-phase 200 V class 7.5 kW
(for North America)
C1
-
075
L
F
U
Example 3: Three-phase 400 V class, 15 kW
(for Europe)
C1
-
150
H
F
E
Applicable motor output
001: 0.1 kW to 150: 15 kW
Input power specifications
S: Single-phase 200 V, L: Three-phase 200 V
H: Three-phase 400 V
F: With operator keypad
Region:
None: Japan, E: Europe, U: North America, C: China
 The model of the product is indicated on the specification label on the side of the product body.
The details on the specification label are as follows.
 In this Guide, some indications may be omitted from the model name. In that case, the omitted
indications are not concerned with the description.
 The input and output currents on the specification label are UL certified current values.
 The "***" part of the label above shows the product-specific values.
Inverter model
Input ratings (Frequency/Voltage/
No. of phases/Current (LD/ND))
Output ratings (Frequency/Voltage/
No. of phases/Current (LD/ND))
Manufacturing Number
Model: C1 -001LF
Hitachi Industrial Equipment
Systems Co., Ltd.
MADE IN 〇〇〇
Ver. 1.00
INVERTER
MFG No. **** ****** *****
Date:****
NE*****-***
WJseries C1
0.2 / 0.1
Version
Country of manufacture
Applicable motor capacity (kW)
Low Duty (LD)/Normal Duty (ND)
Example of three-phase 200 V class 0.1 kW (for Japan)
QR
code
Q
A
A
!