OPERATION OF THE SOFTWARE MENU
Imager Duo Operator’s Manual
4.37
Report - Server Error Log
The Server Error log lists any error events that the server encountered, display-
ing the most recent at the top of the list and older events following. (See Figure
4-51.)
Select the Server Error Log by clicking on the correct radio button and then click
on the
View
button. The report will display as many lines of data as selected in
the report limit setting (500 to 5000), refer to “System - Lab Settings” on
page 4.56.
Click on the
Print
button to print out a copy of the report. Click on the
Save to
USB
button to save the report to a USB key, or the report may be saved to the
NAS drive (if your system is configured with H
net
). Click on the
Close
button
to return to the Log Selection menu.
Figure 4-51 Server Error Log Report
To Next Page
Loading...
