OPERATION OF THE SOFTWARE MENU
4.42
Imager Duo Operator’s Manual
Report - Image Processor Slide Event Log
The Slide Event Log displays all slide event occurrences, from IPs on the net-
work system. These are the same slide events that are displayed on the batch
report for each batch run on an IP, but they are also captured in this report.
The errors are displayed with the most recent events at the top and older events
following. Each event entry shows which cassette number and which slot the
slide was in, what the Slide ID was, time and date stamp, and a brief error
code/description.
The report will display as many lines of data as selected in the report limit set-
ting (500 to 5000), refer to “System - Lab Settings” on page 4.56.
Figure 4-56 Slide Processing Events Window
Click on the
Print
button to print the report. Click on the
Save to USB
button to
save the report to a USB key, or the report may be saved the NAS drive (if your
system is configured with H
net
). Click on the
Close
button to return to the Logs
Selection menu.
To Next Page
Loading...
