OPERATION OF THE IMAGER DUO
Imager Duo Operator’s Manual
3.17
The partial blue coloring of a slide cassette is used only to indicate that imaging
of the slides is still in process; the percentage of area that is colored blue is a
graduated measure of the slides completed.
As an example, if a cassette only had five slides in it, the whole cassette would
turn blue when the fifth slide completed processing - indicating that all avail-
able slides and the verification slide had been processed.
Slide Processing Event Log
If a slide is not processed, it will be listed in the Slide Processing Event Log,
located on the right side of the user interface. (Refer to Figure 3-19.) The Event
Log lists unprocessed slides in sequence as they occur. Each listing contains the
event description, event number, cassette number, slot number, date, time and
Slide ID (if known).
If more than four events have occurred, a scroll bar appears at the right of the
Slide Processing Event Log graphic. Use the mouse to scroll through the list to
view all events. If a long message is displayed, a scroll bar on the bottom of the
frame will appear.
Note:
The event log is only accumulated and displayed with the batch that is
in progress. When a new batch is started, the Slide Processing Event Log
is cleared. Refer to Chapter 4, Sections Slide Event Log Report and Run
Report to view previous slide processing event logs.
To Next Page
Loading...
