Honeywell CF3680 - Page 181

N3680 Decoded Engine User Guide 165
China Post (Hong Kong 2 of 5) Msg.
Length
Minimum (2 - 80) *4 CPCMIN## 122
Maximum (2 - 80) *80 CPCMAX## 122
Korea Post Default All Korea Post Settings KPCDFT 123
*Off KPCENA0 123
On KPCENA1 123
Korea Post Msg. Length Minimum (2 - 80) *4 KPCMIN## 123
Maximum (2 - 80) *48 KPCMAX## 123
Korea Post Check Digit Transmit Check Digit KPCCHK1 123
*Don’t Transmit Check Digit KPCCHK0 123
Imaging Default Commands
Image Snap Default all Imaging Commands IMGDFT 125
Imaging Style - Decoding SNPSTY0 126
*Imaging Style - Photo SNPSTY1 126
Imaging Style - Manual SNPSTY2 126
Beeper On SNPBEP1 126
*Beeper Off SNPBEP0 126
*Wait for Trigger Off SNPTRG0 127
Wait for Trigger On SNPTRG1 127
*LED State - Off SNPLED0 127
LED State - On SNPLED1 127
Exposure (1-7874 microseconds) SNPEXP 127
*Gain - None SNPGAN1 128
Gain - Medium SNPGAN2 128
Gain - Heavy SNPGAN4 128
Gain - Maximum SNPGAN8 128
Target White Value (0-255) *125 SNPWHT### 128
Delta for Acceptance (0-255) *25 SNPDEL### 128
Update Tries (0-10) *6 SNPTRY## 129
Target Set Point Percentage (1-99) *50 SNPPCT## 129
Image Ship *Infinity Filter - Off IMGINF0 130
Infinity Filter - On IMGINF1 130
*Compensation Off IMGCOR0 130
Compensation On IMGCOR1 130
*Pixel Depth - 8 bits/pixel (grayscale) IMGBPP8 130
Pixel Depth - 1 bit/pixel (B&W) IMGBPP1 130
*Don’t Sharpen Edges IMGEDG0 131
Sharpen Edges (0-23) IMGEDG## 131
Selection
Setting
* Indicates default
Serial Command
# Indicates a
numeric entry
Page