Honeywell Chadwick-Helmuth 8500C - Harness Assemblies (Figure 5-21); Power Supply Board A2

Disassembly
8500C/8500C+ System Maintenance Manual 5-57
5.8.2.3 Power Supply Board A2
a. Disconnect three connectors (J1, J2, J3) from power supply board A2.
b. Remove four hex nuts (6) and two spacers (9), and remove power supply board A2 from
chassis (11).
5.8.2.4 Harness Assemblies (Figure 5-21)
The harness assemblies consist of the parts that remain in the chassis after the circuit boards have been
removed.