10 - 3
Mounting the Mobile Base
Safety Precautions
Honeywell is not responsible for any damages caused to you, your vehicle, or other individuals due to the installation of the
Dolphin Mobile mount. Follow these safety precautions when mounting the mobile base:
Installation
1. Push the suction cup base firmly to the windshield.
2. Flip the mounting lever down to secure the suction cup.
Do not mount the base in a location where it prevents safe operation of the vehicle and/or impedes the vehicle
operator's field of view.
Do not mount the base in a location where the connectors on the bottom panel of the base are not easily
accessible. Be sure to leave enough room for unrestricted cable connections.
The Mobile base is intended for use in an enclosed space protected from the elements. Do not mount the
Mobile base on external vehicle surfaces.
Do not install the Mobile base in an air bag deployment zone. Honeywell assumes no responsibility of liability
for injury or death because of car crashes and/or air bag deployment.
To Next Page
Loading...
