3 - 5
Aiming Beam
The aiming beam is smaller when the terminal is held closer to the code and larger when it is farther from the code.
Symbologies with smaller bars or elements (mil size) should be read closer to the unit whereas symbologies with larger
bars or elements (mil size) should be read farther from the unit.
Linear Bar Code.
2D Matrix Symbol
HON:ScanButtonEnable Enables scanner driver handling when the scan button is pressed and
released. When using the Scan Demo, this profile has no visible effect
since the demo application handles all scan button events.
Example: When the scan button is pressed, the scanner driver starts
scanning and sends the
ClaimedBarcodeScanner.TriggerPressed event.
When the scan button is released, the scanner driver stops
scanning and sends the
ClaimedBarcodeScanner.TriggerReleased event.
HON:ScanButtonDisable Disables scanner driver handling when the scan button is pressed.
When using the Scan Demo, this profile has no visible effect since the
demo application handles all scan button events.
Example: When the scan button is pressed, the scanner only sends
the ClaimedBarcodeScanner.TriggerPressed event.
When the scan button is released, the scanner only sends
the ClaimedBarcodeScanner.TriggerReleased event.
HON:EnableOOBE Enables the symbology types required when the built-in out-of-box
plug-in runs at first boot for scanning EZConfig labels.
Profile Description
To Next Page
Loading...
Need help?
General
Weight and Dimensions
