EasyManua.ls Logo

Honeywell Dolphin 75e - Battery Authorize Failed; Charging Options; Charging Times

Honeywell Dolphin 75e
124 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2 - 9
Important Battery and Battery Door Replacement Guidelines
Follow the guidelines listed below when ordering batteries and/or battery doors.
Size (e.g., standard or extended): The battery and battery door must be the same size.
Type (e.g., locking or non-locking): Dolphin 75e models are only compatible locking type battery doors.
Near Field Communication (NFC) requirements: Use only NFC compatible battery doors with NFC equipped Dolphin
models identified with the letter N at the end of the model number (e.g., 75exxN).
Important: All battery and connector doors must be present, undamaged, and properly closed to maintain the
environmental rating of the terminal.
Battery Authorize Failed
If a “Battery Authorize failed” notification appears, replace the battery with a qualified Honeywell Li-ion battery pack. The
battery does not charge if authentication fails.
Charging Options
Dolphin 75e terminals ship with the battery significantly discharged of power. Before using a terminal for the first time,
charge the battery with a Dolphin charging device for a minimum of 4 hours for the standard battery and 6 hours for the
extended battery. When using the 70e-USB Charge/Communication cable to charge from a 500mA USB port on a host
device, charge the battery for a minimum of 6 hours for the standard battery and 8 hours for the extended battery.
When the main battery is installed in the terminal, use one of the following:
Dolphin 70e Black HomeBase (Model 70e-HB), see page 8-1
Dolphin 70e Black eBase (Model 70e-EHB), see page 9-1
Dolphin 70e Black Mobile Base (Model 70e-MB), see page 10-1
Dolphin 70e Black ChargeBase (Model 70e-CB), see page 11-1
Dolphin 70e Black Net Base (Model 70e-NB), see page 12-1
Dolphin 70e USB Charge/Communication Cable (Model 70e-USB ADAPTERKIT) included with terminal, see page 1-14
When the main battery is not installed in the terminal:
Place the battery pack in the Auxiliary Battery Well of the Dolphin 70e Black HomeBase (Model 70e-HB) or the Dolphin
70e Black eBase (Model 70e-EHB).
Insert the battery in the QuadCharger (Model COMMON-QC), see page 2-1.
Charging Times
We recommend use of Honeywell Li-ion battery packs. Use of any non-Honeywell battery may result in damage
not covered by the warranty.
Charging Peripheral/Accessory
Model: 70e-BTSC Model: 70e-BTEC
BAT-STANDARD-02 BAT-EXTENDED-02
HomeBase (Model 70e-HB) 4 hours 6 hours
eBase (Model 70e-EHB) 4 hours 6 hours
ChargeBase (Model 70e-CB) 4 hours 6 hours
Net Base (Model 70e-NB) 4 hours 6 hours
Mobile Base (Model 70e-MB) 4 hours 6 hours
Mobile Charger (Model 70e-MC) 4 hours 6 hours
!
Start Action Center

Table of Contents

Other manuals for Honeywell Dolphin 75e

Related product manuals