5 - 8
Viewing Software and Hardware information
To view basic software and hardware information:
1. In the Apps list, touch Settings > about.
2. Select more info. The following information appears on the screen.
• OS version
• Firmware and hardware revision numbers
• Radio software and hardware version
• Bootloader version
• Chip SOC version
• Screen resolution
• Mac address
•Custom ID
To view detailed software and hardware information:
1. In the Apps list, touch DiagnosticInfo .
2. Swipe up or down to scroll through the following:
• System Date/Time
• Device Information
• Scanner Information
• Honeywell Apps (version number)
• Radio Information (includes MAC, Bluetooth, IP Addresses)
• Battery Information
• Memory Information
3. If you want to export the diagnostic information to a text file, touch Save .
4. Select a folder location and then touch Save .
5. Select ok to return to the diagnostic info screen.
Performing a Factory Reset (Clean Boot)
To learn how to perform a Factory Reset (Clean Boot), see Resetting the Terminal on page 1-13.
Changing the Display Settings
Brightness
You can either set the screen brightness level to automatically adjust or stay at a fixed level. The default setting is
automatically adjust.
1. In the Apps list, touch Settings > brightness.
2. Select the toggle box to turn automatic brightness adjustment On or Off .
3. If automatic is turned off, touch the box under Level and select one either low, medium or high.
Screen Rotation
By default, the display automatically adjusts the orientation of the screen between landscape and portrait when the
terminal is rotated. To prevent the screen from automatically rotating, turn on the Rotation lock setting.
To Next Page
Loading...
