Honeywell Dolphin 75e User Manual

7 - 2
Making the Terminal Discoverable
By default, the Dolphin terminal is not discoverable by other Bluetooth devices unless the following conditions are met:
• the Bluetooth radio in turned On
• the Bluetooth settings screen is displayed
• the screen lock is off and the terminal is not in sleep mode
Bluetooth Advanced Options
If your Bluetooth device has problems with speech recognition, select advanced on the Bluetooth settings screen. Check
the box next to Use an alternate Bluetooth audio connection for Speech.
Sharing Photos and Videos
Before attempting to transfer files, make sure the receiving Bluetooth device is in range of the terminal and set to be
discoverable by other devices. The device must be able to support the Bluetooth Object Push Profile (OPP) needed for the
transfer. Depending on the operating system of the receiving device, you may need to set the device to receive incoming
beams (Android devices).
1. Verify the Bluetooth radio is turned on for both devices. See Turning the Bluetooth Radio On or Off on page 7-1.
2. Pair the terminal with the device that going to receive the file. To learn how, see Connecting to Other Bluetooth Devices
on page 7-1.
3. In the Apps list on the terminal, touch Photos .
4. Do one of the following:
• To share a photo, browse to and select the photo. Touch share .
• To share a video select albums > Camera Roll. Select the video you want to share, and then touch share .
5. Touch Bluetooth.
6. On Choose Bluetooth device screen, touch the name of the receiving device from the paired device list.
A message at the top of the screen notifies you the file is Sharing with a progress indicator (%).
7. Accept the file transfer on the receiving device. The acceptance procedure depends on the device’s OS and security
protocols.
A Transfer complete message appears at the top of the screen on the Dolphin 75e.
If you are sharing with another Windows Embedded 8.1 Handheld device, “Done and saved. Tap to view.” appears at
the top of the screen indicating a successful file transfer.
Near Field Communication (NFC) Technology
NFC technology provides the ability for short-range, wireless data transfer between the terminal and NFC tags or other NFC
enabled devices placed in close proximity (tapped) to the back of the terminal. NFC equipped Dolphin 75e models support the
following:
• NFC tag Reader/Write mode
The terminal reads/writes NFC Data Exchange Format (NDEF) information from/to an NFC tag.
• Peer-to-Peer (P2P) mode
The terminal uses either Bluetooth or WLAN technology to transfer content (e.g., a picture, contact information, Web page
URL, or file) between NFC enabled devices.
Note: Sleep mode (Suspend mode) and the screen lock temporarily turns the NFC radio off.

Honeywell Dolphin 75e Specifications

General

Display diagonal	4.3 \
Display resolution	480 x 800 pixels
Speakers	stereo
Flash memory	16 GB
Internal memory	0.002 GB
Internal memory type	-
Compatible memory cards	MicroSD (TransFlash), MicroSDHC
Processor family	Qualcomm
Processor frequency	2.26 GHz
Bundled software	Honeywell Powertools and Demos
Operating system installed	Android 4.4.4
Data network	Not supported
Wi-Fi standards	802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth version	4.0
Security algorithms	EAP-TLS, EAP-TTLS, WEP, WPA2-PSK
Rear camera resolution (numeric)	8 MP
I/O ports	Micro USB, headphone/mic combo jack
Headphone connectivity	3.5 mm
Product color	Black, Orange, Silver
Phone function	No
International Protection (IP) code	IP67
Battery capacity	1670 mAh
Battery life (max)	6 h
Storage temperature (T-T)	-25 - 70 °C
Operating temperature (T-T)	-20 - 50 °C
Operating relative humidity (H-H)	0 - 95 %

Weight and Dimensions

Depth	134 mm
Width	73 mm
Height	18 mm
Weight	204 g