Honeywell FIRE-LITE MS-10UD Series User Manual

58 MS-5UD & MS-10UD Series Manual — P/N 52626:C7 6/12/2018
Programming Master Programming Level
Pre-signal
The Pre-signal option programs the zone to delay panel activation for a preprogrammed time delay of up to three minutes while allowing
for visual verification by a person. Note that the alarm relay and communicator will respond to the initial alarm immediately. To enable
the Pre-signal feature, press 2 while viewing PAS/Pre-Signal Screen. Refer to “Presignal” on page 100.

Honeywell FIRE-LITE MS-10UD Series Specifications

General

Brand	Honeywell
Model	FIRE-LITE MS-10UD Series
Category	Control Panel
Language	English