Honeywell Galaxy Dimension series Integration Guide

gtap.genetec.com | Honeywell Galaxy Control Panel Integration Guide 5.2 41
EN.550.007-V5.2.C4(3) | Last updated: March 11, 2014
SYS RESET Ksw reset Burglar alarm OR-Disarm alarm, SYS RESET-Ksw reset Burglar
alarm
TAMP RST All Tamper alarms reset OR-Disarm alarm, TAMP RST-All Tamper alarms
reset
PA-Panic Alarm DELAY ALM PA Delay zone alarm PA-Panic Alarm, +DELAY ALM-PA Delay zone
alarm
PA PA zone alarm PA-Panic Alarm, +PA-PA zone alarm
PJ-Pan Troub rest LOW RES Restor zone resistance PJ-Pan Troub rest, -LOW RES-Restor zone
resistance
PR-Panic Restoral DELAY ALM PA Delay zone restored PR-Panic Restoral, -DELAY ALM-PA Delay zone
restored
PA PA zone restored PR-Panic Restoral, -PA-PA zone restored
PT-Panic Trouble LOW RES Low resistance on zone PT-Panic Trouble, +LOW RES-Low resistance on
zone
TA-Tamper Alarm AUX TAMP Auxilary Tamper alarm TA-Tamper Alarm, +AUX TAMP-Auxilary
Tamper alarm
BELL TAMP Bell Tamper zone alarm TA-Tamper Alarm, +BELL TAMP-Bell Tamper
zone alarm
LID TAMP Lid Tamper alarm TA-Tamper Alarm, +LID TAMP-Lid Tamper
alarm
MISSING Missing module alarm TA-Tamper Alarm, +MISSING-Missing module
alarm
TAMP O/C Tamper open circuit TA-Tamper Alarm, +TAMP O/C-Tamper open
circuit
TAMP S/C Tamper short circuit TA-Tamper Alarm, +TAMP S/C-Tamper short
circuit
TAMPER Module Tamper TA-Tamper Alarm, +TAMPER-Module Tamper
TAMPER Tamper zone alarm TA-Tamper Alarm, +TAMPER-Tamper zone
alarm
TR-Tamper Restor AUX TAMP Auxilary Tamper rest TR-Tamper Restor, -AUX TAMP-Auxilary
Tamper rest
BELL TAMP Bell Tamper zone rest TR-Tamper Restor, -BELL TAMP-Bell Tamper
zone rest
SIA event
Event logged
on panel
Event description
logged on panel Custom event in Security Center

Honeywell Galaxy Dimension series Specifications

General

Model	Galaxy Dimension series
Users	Up to 250
Partitions	Up to 8
Operating Temperature	-10°C to +55°C
Compatibility	Honeywell Galaxy accessories and peripherals