Honeywell GasAlert Max XT II User Manual

GasAlertMaxXT II
User Manual
18
Cal IR Lock Enabled (optional)
11. If the Cal IR Lock option is enabled in Fleet Manager II,
the following screen displays.
If IR LOCK ENABLED is enabled, the sensor(s) must be
calibrated using the IR Link or the MicroDock II station.
For more information, refer to Cal IR Lock
in User
Options.
If Previous Bump Failed
If the last bump test performed was unsuccessful, the
following screens display.
Note
BW Technologies by Honeywell recommends the sensor(s) be
bump tested immediately.
Bump Test
Note
BW Technologies by Honeywell recommends to bump test the
sensors before each day’s use to confirm their ability to
respond to gas by exposing the detector to a gas concentration
that exceeds the alarm setpoints.

Honeywell GasAlert Max XT II Specifications

General

Brand	Honeywell
Model	GasAlert Max XT II
Category	Security Sensors
Language	English