Honeywell GasAlert Max XT II User Manual

GasAlertMaxXT II
User Manual
50
Event Logs
The detector records the thirty most recent gas alarm events.
Information that is recorded from an event is as follows:
• Serial number of the detector
• Start time of alarm
• Type, level, and duration of alarm
• Status of sensor
• Peak exposure level (ppm or %)
• Status of the detector
• Detector user
• Supervisor
•Location
• Definables (employee information)
Datalogs
The detector records datalog samples that can be compiled to create a
report using Fleet Manager II. From Fleet Manager II, define how often
the detector records a datalog sample (1-120 seconds) in the Datalog
Interval (seconds) field.
The detector is capable of storing 6 hours to 5 years of information,
depending upon the datalog interval and what information is stored.
When the memory is full, the detector replaces the oldest datalogs with
the most recent datalogs.
The following information is recorded in a datalog:
• Serial number of the detector
• Date and time
• Type of datalog
• Detector status
• Detector user
• Type of gases the detector monitors
• Gas readings
• STEL and TWA readings (H
2
S and CO only)
• Alarm setpoints
• Options enabled/disabled
• Sensor status
• Pump status
• Logging intervals
• Language detector is set to display
• Calibrations performed
• Bump tests performed
• Battery readings
• Temperature readings

Honeywell GasAlert Max XT II Specifications

General

Brand	Honeywell
Model	GasAlert Max XT II
Category	Security Sensors
Language	English