46
Before You Begin Configuring
Launching the Web-Client from IP Utility
To log on to the Web-Client:
1. From the desktop, double-click the Honeywell IP Utility icon .
OR
Click Start
➤All Programs ➤ Honeywell Video Systems ➤ EQUIP Series ➤IP
Utility ➤Honeywell IP Utility.
The Honeywell IP Utility Log On window opens.
2. From the User Name drop-down list, select Administrator or Guest.
3. In the Password field, enter the case-sensitive password.
• The default Administrator password is 1234.
• The default Guest password is guest.
4. Click .
The Honeywell IP Utility program searches for devices on the network and opens to
the Honeywell IP Utility user interface.
5. In the Discovery pane, double-click the device you want to connect to.
OR
Select the device and click .
The network settings for the connected device are displayed in the System pane.
6. Click Launch Browser (see Figure 4-1) to go to the IP Camera logon page.
To Next Page
Loading...
