Honeywell HD4DIP - Logging on to the Web-Client from Internet Explorer; Figure 4-1 Launching the IP Camera Web-Client from IP Utility

HD4DIP Network Camera V2.1 Reference Guide
Document 800-04191 Rev A 47
06/09
Figure 4-1 Launching the IP Camera Web-Client from IP Utility
Logging On to the Web-Client from Internet Explorer
1. From Internet Explorer (v6.0+), enter the URL (IP address of the device) in the
Address bar to open the logon window.
The Web-Client log on dialog opens.
Connect to the device,
then click Launch
Browser