HD4DIP Network Camera V2.1 Reference Guide
Document 800-04191 Rev A 61
06/09
Figure 5-3 Compression Settings Tab: Bit Rate and Quality Priority Settings
Configuring Audio
The HD4DIP(x) Network Camera supports bi-directional audio. There are two supported
voice band channels that function in full duplex mode. Connect industry standard line level
audio input and output to the back of your camera. See Connecting Audio and Alarms, page
25 for more information.
To listen to or capture audio from the camera, select the Camera to Client (PC) check box.
To listen to audio from the client (PC), select the Client (PC) to Camera check box.
To Next Page
Loading...
Need help?
General
