Honeywell HD4DIP - Device Settings Tab

HD4DIP Network Camera V2.1 Reference Guide
Document 800-04191 Rev A 51
06/09
Device Settings Tab
The Device Settings tab allows you to view the network settings and firmware details of the
camera. You can also configure the alarm settings.
Figure 4-4 Device Settings Tab
Compression
Settings
Configure the compression and audio settings.
Set the maximum bit rate and/or target bit rate that the
camera will provide across the network based on priority
mode settings. This value is the threshold that you do not
want the bit rate to exceed.
View received bit rate and frame rate statistics of the current
image in real time.
Camera Setup Configure auto exposure and white balance for the camera.
Video Analytics Configure the camera tamper detection settings and view
video display.
Table 4-1 Tabs/Views in the Web-Client Application (cont’d)
Tab Enables you to...