EasyManua.ls Logo

Honeywell HD4DIP - Specifications

Honeywell HD4DIP
82 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Document 800-04191 Rev A 73
06/09
C
Specifications
Note These specifications refer to all models, except where otherwise noted.
Specifications are subject to change without notice.
Video Signal Specifications NTSC PAL
Video Standard: High Res
Scanning System: 525/60 lines (NTSC)
625/50 lines (PAL)
Image Sensor: 1/3” CCD
Minimum Illumination:
(AGC on, 50 IRE)
0.6 lux color/0.4 lux BW
Horizontal Resolution: 540 TVL
Video Output: 1.0 Vp-p @ 75 Ohms (test only)
S/N Ratio: 50 dB or more (AGC Off)
Auto Gain Control (AGC): Off/On, selectable
Auto Electronic Shutter (ELC): 1/60–1/100,000 sec (NTSC)
1/50–1/100,000 sec (PAL)
Lens Iris Control: Direct Drive (DC)
White Balance (AWB): ATW, User Fixed, AWC (Auto or Manual), Fluorescent,
MWB (Manual Mode), Indoor, Outdoor
Lens Type: 2.8 mm to 10.0 mm Vari-focal Auto Iris, F1.3
Focal Length: f = 2.8 mm to 10 mm
Gamma: 0.45
Back Light Compensation
(BLC):
Off/On, selectable (Low, Mid, High)
Flickerless: Off/On, switchable
Electrical Specifications
Input Voltage: 12 VDC/24 VAC, PoE IEEE 802.3af
Input Voltage Range: 11–16 VDC, 17–28 VAC
Surge Suppression 1.5 kW transient
Power Consumption: 8 W (max)

Table of Contents

Other manuals for Honeywell HD4DIP

Related product manuals