NVR Configurations | 103
800-18160 - B - 07/2014
Configuring Camera Masking Settings
If something masks or blocks part of the camera lens, or if the output video turns to one color
due to a change in the environment’s lighting, the system can alert you to guarantee video
continuity.
Select Camera Masking from the Event Type drop-down list.
Figure 3-50 Camera Masking Configuration Interface
Table 3-25 Camera Masking Detection Configurations
Configuration Description
Event Type Select the event detection type. Select from Motion
Detection, Video Loss, or Camera Masking.
Channel Select a channel.
Enable Click to enable event detection.
To Next Page
Loading...