Web Operation | 201
800-18160 - B - 07/2014
Figure 5-68 Import&Export Interface
Configuring Automatic Maintenance Settings
1. Click Auto Maintain in the General settings configuration interface to open the Auto
Maintain settings configuration interface.
Figure 5-69 Auto Maintain Configuration Interface
2. Select when the NVR automatically reboots, both day and time.
3. Select when the NVR automatically deletes old files.
4. Click Save to save the new settings.
Note Click Manual Reboot to manually reboot the NVR.
Configuring Preview Control Settings
Click Preview Control in the General settings configuration interface to open the Preview
Control settings configuration interface.
Table 5-26 Configuration Backup/Import&Export Interface
Configuration Description
Browse Click to select a file for importing.
Config Import Click to import the local setup files to the NVR.
Config Export Click to export the corresponding web client setup to your PC.
To Next Page
Loading...