www.honeywell.com/security
144 | Performance Series Network Video Recorder User Guide
There are six function tabs:
• Preview: You are currently in the Preview mode, where you can see all these tabs.
• Playback: See Playing Back Recorded Video on page 148
• Alarm: See Enabling and Disabling Alarms on page 152
• Set: See Configuring Settings on page 154
• Information: See Configuring System Information on page 202
• Logout: See Logging Out on page 204
Section 2: Monitor Channels
Figure 5-6 Monitor Channels Section
The Monitor Channels section displays monitor channels that are successfully connected to the
NVR. Left-click to select a channel for viewing.
Section 3: Open All Button
Figure 5-7 Open All Button
The Open All button enables/disables all channels in the real-time monitor. You can also select
the Main Stream or Extra Stream.
Section 4: Start Talk Button
Figure 5-8 Start Talk Button
Click to enable communication. Click
in the control panel on the right to select the
bi-directional communication mode. There are four options for the communication mode:
DEFAULT, G711a, G711u, and PCM.
To Next Page
Loading...
Need help?
General