www.honeywell.com/security
188 | Performance Series Network Video Recorder User Guide
Configuring Recording Settings
Click Record in the Schedule configuration interface to open the Record configuration
interface.
Figure 5-52 Record Configuration Interface for Storage Settings
Table 5-22 Recording Configurations for Storage
Configuration Description
Channel View the channel number. The number displayed here is the
maximum number of channels for your NVR.
Status Select a status: Auto, Manual, or Off.
Auto The system enables the automatic recording function, which
you have set in the Recording Schedule setup (such as
general, motion detection, and alarm settings). See
Configuring the General Settings on page 60, Configuring
Detection Settings on page 174, and Configuring Alarms on
page 179.
Manual This is the highest priority setting.
Enable the corresponding channel to record, no matter the
period that was configured in the Recording setup.
Off Stop the corresponding channel from recording, no matter the
period that was configured in the Recording setup.
To Next Page
Loading...
Need help?
General