Web Operation | 147
800-18160 - B - 07/2014
Table 5-3 Live View Video Window Controls
Configuring Image/Alarm Out Settings
Select a monitor channel for video, and then click the Image button in section 9 of Figure 5-4.
Configuring Image Settings
In the Image settings, you can adjust the brightness, contrast, hue, and saturation.
Table 5-4 Live View Video Window Controls
Control Description
Display Device
Information
Shows the following information about the video:
• IP address
• Channel number
• Bit rate
• Decoding mode: Select either M for Main stream or S for sub
stream.
Digital Zoom Click this button and then left drag the mouse in the zone to zoom
in. Right-click the mouse to return to the original viewing status.
Local Record When you click the Local Record button, the system/NVR begins
recording.
The recorded file is saved to the default system folder:
\RecordDownload.
Snapshot Click to take a snapshot of the currently viewed video. All images
are saved to the default system folder: \picture download.
Audio Turn audio On or Off.
Note This control has nothing to do with the system audio setup.
Close Window Close video in the current window.
To Next Page
Loading...